|
www.riscos.com Technical Support: |
The names given below omit the initial 'Service_' for clarity:
| Name | Number | Meaning |
|---|---|---|
| ADFSPodule | &10800 | Issued by ADFS to locate an ST506 expansion card |
| ADFSPoduleIDE | &10801 | Issued by ADFS to locate an IDE expansion card |
| ADFSPoduleIDEDying | &10802 | IDE expansion card dying |
| BufferStarting | &6F | Notifies modules that the buffer manager is starting |
| CalibrationChanged | &5B | Screen calibration is changed |
| ClaimFIQ | &0C | Claim FIQ |
| ClaimFIQinBackground | &47 | Claim FIQ in background |
| CloseFile | &68 | Close an object, and any children of that object |
| ColourPickerLoaded | &93 | For internal use only |
| DCIFrameTypeFree | &9D | Issued by a network device driver module once initialised, and when finalising |
| DCIFrameTypeFree | &9E | Part of the AUN Driver Control Interface |
| DCIProtocolStatus | &9F | Issued by a protocol module once it has initialised, and when it is finalising |
| DesktopWelcome | &7C | Desktop starting |
| DeviceDead | &79 | Device has been killed by DeviceFS |
| DeviceFSCloseRequest | &81 | Opening a device which already has the maximum number of streams open |
| DeviceFSDying | &71 | DeviceFS is dying |
| DeviceFSStarting | &70 | DeviceFS is starting |
| DiscDismounted | &7D | Disc dismounted |
| DisplayFormatHelp | &6C | Display list of available formats |
| DrawObjectRender | &45540 | Issued when the SWI DrawFile_Render encounters an unrecognised object |
| DrawObjectDeclareFonts | &45541 | Issued when the SWI DrawFile_DeclareFonts encounters an unrecognised object |
| DynamicAreaCreate | &90 | Dynamic area has just been successfully created |
| DynamicAreaRemove | &91 | Dynamic area is about to be removed |
| DynamicAreaRenumber | &92 | Dynamic area is being renumbered |
| EconetDying | &56 | Econet is about to leave |
| EnumerateFormats | &6A | Enumerate available disc formats |
| EnumerateNetworkDrivers | &9B | Issued to obtain a linked list of all active network device drivers |
| EnumerateScreenModes | &8D | Enumerates the available screen modes |
| Error | &06 | Error has occurred |
| ErrorButtonPressed | &400C1 | Issued when any button on the error report is pressed |
| ErrorEnding | &400C2 | Issued immediately before an error report closes |
| ErrorStarting | &400C0 | Issued immediately after Wimp_ReportError is called |
| FilerDying | &4F | Notification that the Filer module is about to close down |
| FilterManagerDying | &88 | Filter Manager dying |
| FilterManagerInstalled | &87 | Filter Manager starting up |
| FindNetworkDriver | &84 | Part of the AUN Driver Control Interface |
| FontsChanged | &6E | New Font$Path detected |
| FSRedeclare | &40 | Start up filing system |
| Help | &09 | *Help has been called |
| IdentifyDisc | &69 | Identify disc format |
| IdentifyFormat | &6B | Identify disc format name |
| International | &43 | International service |
| InternetStatus | &B0 | Issued by the Internet module when an interface address has been changed |
| InvalidateCache | &82 | Broadcast whenever the cache is flushed within ColourTrans |
| KeyHandler | &44 | Keyboard handler |
| LookupFileType | &42 | Look up file type |
| Memory | &11 | Memory controller about to be remapped |
| MemoryMoved | &4E | OS_ChangeDynamicArea has just finished |
| MessageFileClosed | &5E | Message files have been closed |
| ModeChange | &46 | Mode change |
| ModeChanging | &89 | Mode change |
| ModeExtension (VDU) ModeExtension (Video) | &50 | Allow soft modes |
| ModeTranslation (VDU) ModeTranslation (Video) | &51 | Translate modes for unknown monitor types |
| MonitorLeadTranslation (VDU) ModeTranslation (Video) | &76 | Translate monitor lead ID |
| MouseTrap | &52 | The Wimp has detected a significant mouse movement |
| NetFS | &55 | Either a *Logon, a *Bye or a *SDisc/*Mount has occurred |
| NetFSDying | &5F | NetFS is dying |
| NetPrintCheckD1 | &40200 | Issued by NetPrint to determine if there is a local printer server running |
| NetworkDriverStatus | &8B | Part of the AUN Driver Control Interface |
| NewApplication | &2A | Application about to start |
| PagesSafe | &8F | Pages specified have been swapped for different pages |
| PagesUnsafe | &8E | Pages specified are about to be swapped for different pages |
| PDriverChanged | &7F | Currently selected printer driver has changed |
| PDriverGetMessages | &78 | Get common messages file |
| PDriverStarting | &65 | PDriver sharer module started |
| PDumperDying | &67 | PDriverDP module dying |
| PDumperStarting | &66 | PDriverDP module starting up |
| Portable | &8A | Power down or up |
| PostInit | &73 | All modules have been initialised |
| PreModeChange | &4D | Mode change |
| PreReset | &45 | Pre-reset |
| &41 | For internal use only | |
| ProtocolDying | &83 | Part of the AUN Driver Control Interface |
| ReAllocatePorts | &48 | Econet restarting |
| ReleaseFIQ | &0B | Release FIQ |
| Reset | &27 | Post-Reset |
| ResourceFSDying | &5A | ResourceFS is killed |
| ResourceFSStarted | &59 | The file structure inside ResourceFS has changed |
| ResourceFSStarting | &60 | ResourceFS module is reloaded or reinitialised |
| ScreenBlanked | &7A | Screen blanked by screen blanker |
| ScreenRestored | &7B | Screen restored by screen blanker |
| ShutDown | &7E | Switcher shutting down |
| ShutdownComplete | &80 | Shutdown completed |
| Sound | &54 | Parts of the Sound system are starting or dying |
| StartedFiler | &4C | Request to filing-system-specific desktop filers to set taskHandle variable to zero |
| StartedWimp | &4A | Request to task modules to set taskHandle variable to zero |
| StartFiler | &4B | Request to filing-system-specific desktop filers to start up |
| StartUpFS | &12 | Start up filing system |
| StartWimp | &49 | Start up any resident module tasks using Wimp_StartTask |
| SwitchingOutputToSprite | &72 | Output switched to sprite, mask or screen |
| SyntaxError | &8C | Syntax error translation |
| TerritoryManagerLoaded | &64 | Tell territory modules to register themselves. |
| TerritoryStarted | &75 | New territory starting |
| UKByte | &07 | Unknown OS_Byte |
| UKCommand | &04 | Unknown command |
| UKConfig | &28 | Unknown *Configure |
| UKStatus | &29 | Unknown *Status |
| UKWord | &08 | Unknown OS_Word |
| ValidateAddress | &6D | OS_ValidateAddress has been called with an unrecognised area |
| WimpCloseDown | &53 | Notification that the Window Manager is about to close down a task |
| WimpPalette | &5D | Palette change |
| WimpReportError | &86 | Allows the Filter Manager to install filters with the Window Manager |
| WimpReportError | &57 | Request to suspend trapping of VDU output so an error can be displayed |
| WimpSaveDesktop | &5C | Save some state to a desktop boot file |
| WimpReportError | &85 | Wimp sprite pools have moved |